Touch the temperature probe and one of the readings will start to change its value (as the temperature of the probe will change).Īlternatively, you can also unplug the temperature sensor and see which sensor changed its readings to 65535. It’s very easy to locate it: again navigate to MENU > DEVICES > OHMMETERS and see what the readings are. To resolve this issue, you have to select the actual input to which you connected your sensor. Our temperature sensors are of the NTC10k type and if you map 65535 ohms (infinite resistance, a.k.a nothing connected), you map the value to -13 ☌ or 8.6 ☏. The maximum number our device can work with is 65535, which can be translated to “infinite resistance”. If it is 65535, the problem is that you did not select the correct input. Then navigate to MENU > DEVICES > OHMMETERS and see what the raw reading is for that input.
Write down what you have selected for “DEVICE” (input to which you connected the temperature probe). Please navigate to MENU > DEVICES > TEMPERATURE SENSORS and select your sensor.
